321-314-3816
English

1/8 Scale RC Losi 8IGHT 4WD Buggy Nitro RTR Red Yellow

$349.99
Ships Same Day Order Before 4pm est
From 10am - 6pm est Mon-Fri
Discover our products
Safe shopping
Availability: Out of stock
Delivery time: 2-4 Weeks

The 8IGHT™ racing platform has multiple ROAR national titles and international wins to its credit. This thoroughly equipped, RTR version gives anyone eager to get into nitro buggy racing everything they need to be a contender, right out of the box.


Features

Includes Spektrum DX2E DSMR® transmitter
Pre-set suspension geometry
Spektrum™ waterproof metal-gear servos
15mm adjustable oil-filled shocks
Dynamite® .21 nitro engine with pull start
4mm T-6 aluminum chassis plate
Center and rear dogbones
Your fast track to nitro buggy racing
Includes Dynamite 1600mAh 6V NiMH receiver pack
Metal-gear transmission and sealed differentials
Gen III radio tray for longer servo life

Overview

 


Key Features

Your fast track to nitro buggy racing
4mm T-6 aluminum chassis plate
Gen III radio tray for longer servo life
Dynamite® .21 nitro engine with pull start
Pre-set suspension geometry
Metal-gear transmission and sealed differentials
Center and rear dogbones
15mm adjustable oil-filled shocks
Spektrum™ waterproof metal-gear servos
Includes Spektrum DX2E DSMR® transmitter
Includes Dynamite 1600mAh 6V NiMH receiver pack

 

Needed to Complete

20-30% Nitromethane fuel
Nitromethane-Approved Dispenser
NiMH Charger
Glow Igniter

 

What's in the box?

(1) 8IGHT 4WD Nitro Buggy RTR
(1) DX2E Transmitter
(4) AA Batteries
(1) Dynamite 1600mAh 6V NiMH receiver pack
(1) 4-Way Cross Wrench
(1) Bind Plug
(1) User Manual

 

Overview

If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.

Race-Proven Durability

In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Specifications

 

 

Approximate Assembly Time
No assembly required
Ball Bearings
Yes
Batteries
Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Body
8IGHT Cab -Forward, Screened
Brakes
Composite Disc with Steal Pads
Bushing Material
Metal
Chassis
4mm, 6061 T-6 Aluminum
Completion Level
Ready-To-Run
Differential
Sealed viscous filled gear differential
Drivetrain
4WD
Engine Size
.21 cu in (3.4cc), .21 Dynamite
Final Drive Ratio
11.5:1
Front Track
12.0 in (305mm), 12.1 in (307mm)
Fuel Tank Capacity
125cc (4.2 Oz)
Gear Pitch
1.0 Module
Ground Clearance
2.4 in (60mm)
Height
7.1 in (180mm)
Internal Gear Ratio
3.92:1
Length
19.6 in (497mm)
Outer Diameter
4.4 in (111mm)
Pinion
17T
Radio
Included
Rear Track
12.1 in (307mm)
Receiver
Included
Scale
1/8
Servos
Included
Shock Type
16mm Big Bore Aluminum Oil Filled
Speed Control
Included
Spur Gear
50T
Suspension
Independent
Tire Compound
Medium
Tire Tread
XBT
Vehicle Type
Buggy, Buggy
Weight
7.8 lb (3.5kg)
Wheel Type
Dish
Wheel Width
1.7 in (42mm)
Wheelbase
12.7 -12.9 in (323-327mm)
Width
12.1 in (308mm)

 

0 stars based on 0 reviews
. . . . .